Agar Protector 5Lt Water Base Fabric Protection Treatment
Odour: Floral fragrance.
Protector is a water-based carpet and upholstery protection treatment which creates a barrier to soilage around the fibres.
How Does It Work?
Based on Fluoropolymer technology, Protector is a fabric protection treatment designed for spray application. Protector is a water-based product. Protector puts an invisible barrier to soil and stain penetration around carpet and fabric fibres. Spillages can be vacuumed up or sponged off easily leaving the carpet clean and fresh. Being a water-based product, this Protector takes from 4 to 6 hours to dry, depending on temperature, humidity, fibre density and rate of application. It is an air-cured product which reaches a high level of stain repellence when it dries and continues to develop more repellence over the following weeks. If possible, the carpet should be left to dry for 24 hours before use. The high repellence provided by Protector will enable liquid spills to be blotted up before a stain occurs.
For Use On:
Protector is designed for use on properly cleaned carpet, drapes, rugs, cloth items and fabric-upholstered furniture (but not leather).
Application:
Preparation: Protector can only be applied to carpets that are either new or have been cleaned by hot water extraction and rinsing. Carpets that have been rotary shampooed should be extracted with warm water to remove shampoo residues.
Equipment Required: Electric or pressurised spray-gun. Maintain a pressure between 40 and 50 psi – not below 38 psi and not above 60 psi. DO NOT ATOMIZE OR AEROSOLIZE the product. Measuring jug, 1 litre size, and a plastic bucket.
Dilution and Coverage: Determine if the carpet is dry, damp or to be re-treated and use the following tables to make up the correct amount of solution at the right strength. For carpet bonded to the floor, see RETREATMENT. When diluting, always add the water to the PROTECTOR then stir well.
Note: PROTECTOR should be mixed as per instruction, please see the attached product information sheet for further information.
Original: $120.71
-65%$120.71
$42.25More Images
Agar Protector 5Lt Water Base Fabric Protection Treatment
Odour: Floral fragrance.
Protector is a water-based carpet and upholstery protection treatment which creates a barrier to soilage around the fibres.
How Does It Work?
Based on Fluoropolymer technology, Protector is a fabric protection treatment designed for spray application. Protector is a water-based product. Protector puts an invisible barrier to soil and stain penetration around carpet and fabric fibres. Spillages can be vacuumed up or sponged off easily leaving the carpet clean and fresh. Being a water-based product, this Protector takes from 4 to 6 hours to dry, depending on temperature, humidity, fibre density and rate of application. It is an air-cured product which reaches a high level of stain repellence when it dries and continues to develop more repellence over the following weeks. If possible, the carpet should be left to dry for 24 hours before use. The high repellence provided by Protector will enable liquid spills to be blotted up before a stain occurs.
For Use On:
Protector is designed for use on properly cleaned carpet, drapes, rugs, cloth items and fabric-upholstered furniture (but not leather).
Application:
Preparation: Protector can only be applied to carpets that are either new or have been cleaned by hot water extraction and rinsing. Carpets that have been rotary shampooed should be extracted with warm water to remove shampoo residues.
Equipment Required: Electric or pressurised spray-gun. Maintain a pressure between 40 and 50 psi – not below 38 psi and not above 60 psi. DO NOT ATOMIZE OR AEROSOLIZE the product. Measuring jug, 1 litre size, and a plastic bucket.
Dilution and Coverage: Determine if the carpet is dry, damp or to be re-treated and use the following tables to make up the correct amount of solution at the right strength. For carpet bonded to the floor, see RETREATMENT. When diluting, always add the water to the PROTECTOR then stir well.
Note: PROTECTOR should be mixed as per instruction, please see the attached product information sheet for further information.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Odour: Floral fragrance.
Protector is a water-based carpet and upholstery protection treatment which creates a barrier to soilage around the fibres.
How Does It Work?
Based on Fluoropolymer technology, Protector is a fabric protection treatment designed for spray application. Protector is a water-based product. Protector puts an invisible barrier to soil and stain penetration around carpet and fabric fibres. Spillages can be vacuumed up or sponged off easily leaving the carpet clean and fresh. Being a water-based product, this Protector takes from 4 to 6 hours to dry, depending on temperature, humidity, fibre density and rate of application. It is an air-cured product which reaches a high level of stain repellence when it dries and continues to develop more repellence over the following weeks. If possible, the carpet should be left to dry for 24 hours before use. The high repellence provided by Protector will enable liquid spills to be blotted up before a stain occurs.
For Use On:
Protector is designed for use on properly cleaned carpet, drapes, rugs, cloth items and fabric-upholstered furniture (but not leather).
Application:
Preparation: Protector can only be applied to carpets that are either new or have been cleaned by hot water extraction and rinsing. Carpets that have been rotary shampooed should be extracted with warm water to remove shampoo residues.
Equipment Required: Electric or pressurised spray-gun. Maintain a pressure between 40 and 50 psi – not below 38 psi and not above 60 psi. DO NOT ATOMIZE OR AEROSOLIZE the product. Measuring jug, 1 litre size, and a plastic bucket.
Dilution and Coverage: Determine if the carpet is dry, damp or to be re-treated and use the following tables to make up the correct amount of solution at the right strength. For carpet bonded to the floor, see RETREATMENT. When diluting, always add the water to the PROTECTOR then stir well.
Note: PROTECTOR should be mixed as per instruction, please see the attached product information sheet for further information.
